E-mail: furixuanwei@126.com
Sales Hotline: 400 005 3188
Product
Composition and performance:
Water-based acrylic amino paint is an epoxy-modified acrylic water-based resin synthesized independently through a special process. This product is a baking varnish made of water-based resin, high-quality pigments and fillers, additives, water, etc. and amino resin.
The coating can achieve the decorative effect of imitating aluminum-plastic panels
Excellent metallic texture and luster; excellent gloss and color retention
Uses water as diluent, non-toxic, odorless, non-flammable and non-explosive, safe for construction, storage and transportation
Good water resistance, acid, alkali, salt and chemical resistance
Easy to construct, construction tools, containers, etc. can be cleaned with water, and the VOC residue test of the paint film has passed the European environmental protection test
use:
Suitable for vehicles, metal packaging, especially various hardware workpieces or metal accessories with high surface performance requirements, etc., for surface decoration and protection
Technical indicators:
project | Performance Indicators | |
color | Various | |
Status in the container | After stirring and mixing, there is no hard lump and it is in a uniform state | |
Construction | Spraying two layers without obstacles | |
Coating appearance | Flat and smooth | |
Fineness/μm, ≤ | 15 | |
Gloss (60°), ≥ | 90 | |
Drying time/h (120℃), ≤
| Touch Dry | 0.5 12 |
Practical | ||
Outflow time (ISO 6 cup)/s, ≥ | 80 | |
Non-volatile matter/%,≥ | 50 | |
Hiding power/(g/ ㎡ ), ≤ light color | 90 | |
Impact resistance/cm | 50 | |
Flexibility/mm | 1 | |
Pencil hardness (abrasions) | H | |
Cross-cut test/level | 1 | |
Water resistance (120h) | No bubbling, no shedding, slight discoloration allowed | |
Salt water resistance (120h) | No bubbling, no shedding, slight discoloration allowed | |
Salt spray resistance (120h) | No blistering, no peeling, no rusting | |
Artificial aging resistance (240h) | No powdering, slight discoloration allowed | |
Note:
The baking temperature is 120±5℃ and the time is 30-40min (adjusted according to the size of the component). If the temperature is too high, the paint film will become brittle, dull and yellow. The wet film should be dried at room temperature for 15-30 minutes or pre-baked at 80℃ for 15 minutes before high-temperature baking to prevent blistering of the coating.
Construction instructions:
Single component can be used directly, add 10-20% deionized water, and apply by high-pressure airless spray, brush or roller.
Surface treatment:
The steel surface treatment is carried out in accordance with the national standard "Surface Rust Grade and Rust Removal Grade of Steel before Painting" GB8923-88. The sandblasting rust removal reaches the national standard Sa2.5 level, the manual rust removal reaches St3 level, the primer is phosphated and coated with electrophoretic paint.
Notes:
1. The paint should be stored in a low temperature, ventilated and dry place; away from fire and heat sources; the shelf life is one year in a cool and dry place.
2. Since the pH value decreases slowly during storage (normal pH = 8.0-10.0), uneven dissolution or decreased viscosity during stirring is a normal phenomenon. You can add appropriate neutralizer while stirring until it is evenly stirred and it can still be used normally.
If you have any questions, please contact us promptly and we will answer your questions as soon as possible.