E-mail: furixuanwei@126.com
Sales Hotline: 400 005 3188
Product
Composition:
Organic fluorine resin, high-quality pigments and fillers, imported aluminum silver paste, imported additives, organic solvents, etc.
Features:
Service life of more than 15 years, strong weather resistance, corrosion resistance, durability, and temperature change resistance. No stain, washability, strong self-cleaning properties. Waterproof, non-flammable, mildew-proof, two-component packaging.
Application:
Building cement walls, masonry structures, roof tiles, ceramic surfaces, etc.
Color:
According to color card or customer requirements.
Technical performance:
Project | Performance Indicators | |
Status in the container | After stirring and mixing, there is no hard lump and it is in a uniform state | |
Construction | Paint two layers of barrier-free | |
Coating appearance | Flat and smooth, the paint film has normal appearance | |
Fineness/μm，≤ | 25 | |
Drying time/h,≤ | Touch Dry | 2 |
Practical | 24 | |
Adhesion (cross-hatch method) | Level 1 | |
Non-volatile matter：% | 55 | |
Impact strength，kg·cm | ,50 | |
Flexibility，mm | 1 | |
Washability | 12000 times without showing bottom | |
Stain resistance | Reflection coefficient decrease rate ≤ 3% | |
Water resistance (360h) | No blistering or peeling | |
Freeze-thaw resistance of coating | No blistering, no powdering, no cracking after 20 times | |
Salt spray resistance (2000h) | No blistering or peeling | |
Sulfuric acid resistance (10%, 168h) | No blistering, no powdering, no rusting | |
Hydrochloric acid resistance (10%, 168h) | No blistering, no powdering, no rusting | |
Alkali resistance (10%, 168h) | No blistering, no powdering, no rusting | |
Weather resistance (3000h) | Slight loss of gloss and discoloration are allowed, but no powder loss | |
Construction Guide:
Before use, stir thoroughly and use according to the ratio marked on the trademark. Please use the paint supplier's thinner; dust, oil and other dirt attached to the wall must be cleaned before construction; the surface to be painted must be completely dry. The new cement is too alkaline, so it must be completely dried before construction. The wall moisture content is required to be less than 8%, the pH value is less than 10, and the time interval between each layer of painting should be no less than 8 hours. When using the spraying process, the base coating must be applied with the company's all-purpose closed anti-alkali primer. The actual coverage rate will vary depending on the construction process, the roughness of the surface to be painted and the construction environment. After smoothing and polishing several times with a special matching putty, this fluorocarbon flash metallic paint can be sprayed.
Coating area:
Theoretical value Theoretical value 6-9 square meters/kg·coat.
Storage period:
Cool and dry place, shelf life is one year.
Notes:
1. The paint should be placed in a low temperature, ventilated, dry place, away from fire and heat sources. Work clothes, gloves and protective glasses must be worn during painting, and the construction should be carried out under well-ventilated conditions.
2. This manual is the accumulation of our practice and experience and can be used as a construction guide. Since the product use conditions are beyond our control, we are only responsible for the quality of the paint itself, and this manual does not contain any guarantee components.
If you have any questions, please contact us promptly and we will answer your questions as soon as possible.